How to Replace a Nissan Juke Spare Key
Nissan Juke is a fun and stylish hatchback that features an unusual engine configuration. It's noisy, but it's still enjoyable to drive.
The key fob battery in the Nissan Juke has to be replaced every two years or more, or if the battery is low. You can do it yourself, but you'll require some tools.
Dead Coin Battery
If the key fob of your Nissan Juke is not working, you should check the battery in the coin. It could be dead and must be replaced. This is a simple fix that will take only some minutes. Flip the fob upside down and you'll be able access the tiny latch/release at the back. Remove g28carkeys.co.uk from the old one and then insert the new one, ensuring sure that it is facing down on the fob. Line up the two halves of the fob carefully.
If the fob was exposed to water, it needs to be cleaned before putting the new battery in. You can clean the fob with isopropyl or electronic cleaner, and paper towels. Then allow it to dry completely prior to reinstalling the battery.
The key fob also needs to be linked to the vehicle in order to start it, which can be accomplished by following the instructions in the owner's manual or an OBDII scanner. The most likely reason why the key fob stopped working was because it was not paired. A defective chip inside the fob may cause it to stop working however this is extremely rare. A new receiver module may be required in this instance. If this is the case, it will need to be replaced by an authorized technician.
Water Damage
Key fobs are powered by batteries and the batteries need to be replaced every two years or as soon as your car stops responding when you hit the "start" switch. The key's rubber seals keep water out, but submerging a key fob in the pool or ocean can damage the electronic chip. If this is the case then you'll need the replacement key from Nissan or a locksmith.
If the key fob is equipped with functioning chips It's likely that the computer has simply lost connection to it. This can happen for any number of reasons. It can be fixed by restarting the car. If the "Key ID error" message persists it is necessary to contact Nissan for assistance.
Three common causes are battery that is dead on the key fob as well as a key not programmed, or an unrepaired key fob. The first two are fairly easy to resolve, and the latter is a bit difficult to pinpoint and repair on the spot, however it is generally fixable by a little patience. WhoCanFixMyCar lets you compare Nissan Key Replacement costs in your area and book your repair. It takes just a few seconds and you can read customer reviews from local garages, Nissan car mechanics and dealerships before deciding.
Faulty Chip
The key fob of your Nissan Juke contains a special chip that transmits a message to the vehicle each time you turn it. The key can stop working if the chip is faulty. In this case you'll have to fix the problem by replacing the key. Your Nissan Juke key may be damaged due to several reasons, including water damage or an inactive coin-battery.
If your key fob stops working after a wash or even a bath, it is important to examine the chip for water damage. Check that the retaining clips are tight and that the chip is not exposed to any water. If you observe any signs of water damage to the electronic component, unplug the battery and wipe it down with isopropyl alcohol or electronic cleaner.
If the chip is defective If the chip is defective, you'll need to call your local locksmith or dealer. They will require the year, make, and model of your vehicle in order to find the replacement. You will also have record your VIN (Vehicle ID Number) to ensure that the dealer or locksmith knows which key you own. This will enable them to search for the correct key code and confirm that they are cutting the correct one.
Faulty Receiver Module
The key fob sends a radio frequency signal to your car that performs several functions. It can open the trunk as you hurry to get groceries or start your car by pressing the button on the fob. It can also open your windows and turn on the horn if you accidentally lock the keys inside your car.
If the key fob stops working, there may be an issue with the receiver module inside the vehicle. The receiver modules are tuned to ensure that they can pick up specific frequencies which correspond to the signals transmitted by Nissan key fobs. A damaged receiver module can prevent your car from responding to the signal generated by the key fob in Nissan.
No matter how your Nissan key fob ends up getting damaged, it's always important to have a spare in case the key gets lost or broken. A locksmith or dealership can program an additional key to work with your Nissan. This will save you from the hassle of losing your keys or locking them in your car.
If your Nissan Juke key fob has been exposed to clean rain or tap water The issue could be resolved by cleaning it with isopropyl alcohol or electronic cleaner. If the chip is fried you will need to purchase a new keyfob that can be coded for your vehicle by a locksmith or dealer.
